An International Double-Blind, Peer-Review Journal by NSTRI

Document Type : Research paper

Authors

1 Radiation Application Department, Shahid Beheshti University, P.O. Box: 1983963113, Tehran, Iran.

2 Plasma and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute, B. O. Box: 14399-51113, Tehran, Iran.

Abstract

Fluorine cold plasmas are recognized as effective dry processing techniques for removing surface contaminants with high bond energy. Among the radionuclides, 58Co and 60Co pose significant challenges. The removal of Co isotopes from contaminated metal surfaces is a key focus in developing metal surface cleaning processes. This study aimed to investigate the plasma reaction resulting from the discharge of a dielectric barrier in fluorine gas. This plasma was interacting with a Cobalt oxide film on the surface of stainless steel 304 through experimental observation and simulation study. It was observed that the Cobalt oxide transformed into a powdered form after exposure to plasma irradiation, enabling easy separation from the base metal surface. The efficiency of clearance from the metal surface depends on the generation of fluorine (F) radicals within the plasma. To identify the crucial parameters influencing plasma formation and optimization, the plasma created using CF4 etching gas was simulated using Comsol Multiphysics software. The simulation study reports there are optimal values for voltage, frequency, and the distance between the two electrodes, which enhance cleaning speed. In addition, increasing the temperature will speed up the etching process

Keywords

Main Subjects

  1. Martz JC, Hess DW, Haschke JM, Ward JW, Flamm BF. Demonstration of plutonium etching in a CF4/O2 RF glow discharge. Journal of nuclear materials. 1991;182:277-80.
  2. Schutze A, Jeong JY, Babayan SE, Jaeyoung P, Selwyn GS, Hicks RF. The atmospheric-pressure plasma jet: a review and comparison to other plasma sources. IEEE Transactions on Plasma Science. 1998;26(6):1685-94.
  3. Tatenuma K, Hishinuma Y, Tomatsuri S, Ohashi K, Usui Y. Newly Developed Decontamination Technology Based on Gaseous Reactions Converting to Carbonyl and Fluoric Compounds. Nuclear Technology. 1998;124(2):147-64.
  4. Kim YS, Min JY, Bae KK, Yang MS. Uranium dioxide reaction in CF4/O2 RF plasma. Journal of nuclear materials. 1999;270(1-2):253-8.
  5. Tu VJ, Jeong JY, A S, Babayan SE, G D, Selwyn GS, Hicks RF. Tantalum etching with a nonthermal atmospheric-pressure plasma. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 2000;18(6):2799-805.
  6. Veilleux JM, El-Genk MS, Chamberlin EP, Munson C, FitzPatrick J. Etching of UO2 in NF3 RF plasma glow discharge. Journal of Nuclear Materials. 2000;277(2-3):315-24.
  7. Windarto HF, Matsumoto T, Akatsuka H, Suzuki M. Decontamination process using CF4-O2 microwave discharge plasma at atmospheric pressure. J Nucl Sci Technol. 2000;37(9):787-92.
  8. AGENCY IAE. Management of Radioactive Waste from the Mining and Milling of Ores. Vienna: IAEA; 2002.
  9. Hicks RF, Herrmann HW. Atmospheric-Pressure Plasma Cleaning of Contaminated Surfaces. United States; 2003. Contract No.: DOE/ER--45857.
  10. Kim YS, Jeon SH, Jung CH. Fluorination reaction of uranium dioxide in CF4/O2/N2 r.f. plasma. Annals of Nuclear Energy. 2003;30(11):1199-209.
  11. Kim Y-H, Choi Y-H, Kim J-H, Park J, Ju W-T, Paek K-H, Hwang YS. Decontamination of radioactive metal surface by atmospheric pressure ejected plasma source. Surf coat technol. 2003;171(1-3):317-20.
  12. Kim Y-s, Seo Y-d, Koo M. Decontamination of Metal Surface by Reactive Cold Plasma: Removal of Cobalt. J Nucl Sci Technol. 2004;41(11):1100-5.
  13. Yang X, Moravej M, Babayan SE, Nowling GR, Hicks RF. Etching of uranium oxide with a non-thermal, atmospheric pressure plasma. Journal of nuclear materials. 2004;324(2-3):134-9.
  14. Suzuki M, Kadowaki M, Windarto FH, Mori S. Comparison of Different Types of Plasma in Radioactive Surface Decontamination Process. Materials Science Forum. 2005;502:321-6.
  15. Alim F, Richard A, Adam J, Laurel OC, Charlotte L, Corrie W. Guide for the Selection of Chemical, Biological, Radiological, and Nuclear Decontamination Equipment for First Responders: DHS Guide 103-06; 2007.
  16. AGENCY IAE. Managing Low Radioactivity Material from the Decommissioning of Nuclear Facilities. Vienna: IAEA; 2008.
  17. Jeon SH, Kim YS. A Study on Plasma Etching Reaction of Cobalt for Metallic Surface Decontamination. Journal of the Korean Radioactive Waste Society. 2008;6(1):17-23.
  18. Jeon SH, Kim YS, Jung CH. Cold Plasma Processing and Plasma Chemistry of Metallic Cobalt Surface. Plasma Chemistry and Plasma Processing. 2008;28(5):617-28.
  19. Fukumoto H, Fujikake I, Takao Y, Eriguchi K, Ono K. Plasma chemical behaviour of reactants and reaction products during inductively coupled CF4 plasma etching of SiO2. Plasma Sources Science and Technology. 2009;18(4):045027.
  20. Xie HD, Sun B, Zhu XM, Liu YJ. Influence of O2 on the CF4 Decomposition by Atmospheric Microwave Plasma. International Journal of Plasma Environmental Science and Technology. 2009;03(01):39-42.
  21. Veilleux JM, Kim Y. Can plasma decontamination etching of uranium and plutonium be extended to spent nuclear fuel processing? 52nd Annual Meeting, Institute of Nuclear Materials Management; 2011-06-03; United States: N. p.: USDOE; 2011.
  22. CHEN K-C. Generalized Approach for Selecting Plasma Chemistries in Metal Etch. CALIFORNIA: UCLA; 2016.
  23. Karbalai Akbar M. design of a Dielectric Discharge Barrier (DBD) Plasma Generator to Remove Uranium Contamination from Surfaces: Payame Noor University; 2018.
  24. Semmler J, Kuang W, Volchek K, Toor A, Snaglewski A, Khan Z, Azmi P. Large area decontamination after a radiological incident. Journal of Environmental Radioactivity. 2019;199-200:66-74.
  25. Lee J, Kim K, Kim Y-S. A Study on the NF3 Plasma Etching Reaction with Cobalt Oxide Grown on Inconel Base Metal Surface. Plasma Chemistry and Plasma Processing. 2019;39(4):1145-59.
  26. Taran A, Lozina A, Garkusha I, Taran V, Krasnyj V, Gnidenko Y, et al. Evaluation of active power in dielectric barrier discharge with pulse power supply. Journal of Instrumentation. 2021;16(12):T12019.
  27. Lee J-Y, Kim K-M, Ko M-S, Kim Y-S. A study of the NF3 plasma etching reaction with Cobalt oxide films grown on an inorganic compounds. Nuclear Engineering and Technology. 2022;54(12):4449-59.
  28. Kim SJ, Jeong JW, Park SY, Chung CW. High-density plasma etching of Cobalt thin films using C2H5OH/O2/Ar gas mixture. Materials Science and Engineering: B. 2023;293:116494.
  29. Kim Y, Chae S, Ha H, Lee H, Lee S, Chae H. Thermal atomic layer etching of Cobalt using plasma chlorination and chelation with hexafluoroacetylacetone. Applied Surface Science. 2023;619:156751.
  30. LXCAT, electron scattering database, University of Toulouse, France. www.lxcat.net. Accessed 1 Nov 2017
  31. Lee JY, Kim KM, Ko MS, Kim YS. A study of the NF3 plasma etching reaction with Cobalt oxide films grown on an inorganic compounds. Nuclear Engineering and Technology. 2022 Dec 1;54(12):4449-59.
  32. Askari M, Farahani ND, Davani FA, Mahmoodi MB, Alam ZR. Experimental Investigation of the Decontamination of metal Cobalt from Steel 304 Surface by the Dielectric Barrier Discharge Plasma 9th Iranian Plasma Engineering and Plasma Physics Conference; Gonbad Kavous University: ISC; 2022.
  33. Askari M, Farahani ND, Davani FA. Modeling and simulation of dielectric barrier discharge with CF4 etching gas by Comsol Multiphysics. ICNST22; NSTRI, Tehran2022.
  34. Sohbatzadeh F, Mirzanejhad S, Shokri H, Nikpour M. Inactivation of Aspergillus flavus spores in a sealed package by cold plasma streamers. Journal of Theoretical and Applied Physics. 2016 Jun;10:99-106.